Temporal stability of human serum for the diagnosis of dengue virus by ELISA
Every year, millions of people are affected by the mosquito-borne dengue virus. Early and accurate diagnosis of the disease plays a crucial role in proper disease management, and prevention. The detection of immunoglobulin M (IgM) by enzyme-linked immunosorbent assay (ELISA) is a widely used method for the diagnosis of dengue fever. Analytical variables like the post-collection procedure of the blood sample can influence the performance of serological results. This study addresses the temporal effect on the detection of dengue-specific IgM through ELISA. Blood samples were collected from patients with fever cases suspected of dengue infection. Serum was separated by centrifugation. The present study was carried out on samples of active dengue cases. Thereafter, serum was stored and analysed every hour for a maximum of 4 hours. The IgM levels against dengue were measured using a commercial ELISA kit, and the optical density (OD) values were recorded at 450nm. The OD for the IgM values of dengue positive cases were steadily elevated and significantly different from the initial readings compared to each of the time points, with the highest peak at the 3rd hour. All the negative samples demonstrated a lower baseline IgM level of less than 30 units during the 0,1, 2 and 4 hours of the study. There was an increased activity recorded at 3 hours in negative samples. These results underscore the necessity to standardise analytical handling protocols during serological diagnostics to reduce variability in these tests. By understanding these temporal dynamics, we may improve the quality of IgM testing for dengue.
Ranu Jain, Disha Chouhan, Janesh Kumar Gautam, Rina Kumawat, Suman Sundar Mohanty (2026). Temporal stability of human serum for the diagnosis of dengue virus by ELISA. Research Paper, 21(9), 1-7. https://doi.org/10.5281/zenodo.22242544
Robust estimation for a Shankar Distribution Based Two Non-Identical Unit Cold Standby System with Priority in Repair
This paper studies the reliability behaviour of a two-unit nonidentical system configured in parallel with a cold standby and repairable facility along with the robustness in estimates of the system parameters. The lifetime characteristics of both failure and repair times are assumed to follow the Shankar distribution, to provide greater flexibility in modelling real-world data compared to conventional distributions. Using the regenerative point technique, analytical expressions for key reliability measures-including the mean time to system failure (MTSF), steady-state availability, and expected profit-have been obtained. In addition, a simulation study has been conducted to validate the theoretical findings and to assess the overall effectiveness and robustness of the proposed system. The results demonstrate the applicability of the Shankar distribution in reliability modelling and elicit its potential advantages over traditional lifetime distributions in evaluating system performance.
Shivam Tiwari, Pramendra Singh Pundir, Rohit Patawa, Shubham Mishra, Anurag Mishra (2026). Robust estimation for a Shankar Distribution Based Two Non-Identical Unit Cold Standby System with Priority in Repair. Research Paper, 21(9), 1-16. https://doi.org/10.5281/zenodo.22642409
Dentinogenesis Imperfecta Type I: From Opalescent Teeth to Obliterated Pulp Chambers—A Clinicoradiographic Insight
Dentinogenesis imperfecta (DI) is an autosomal dominant inherited disorder that occurs during the development of teeth at the time of histodifferentiation. DI causes structural defects in dentin formation, affecting both deciduous and permanent dentition.The incidence of DI is approximately 1 in 8,000. DI Type 1 is a disease that not only affects the dentition but also has a major impact on the routine activities of the patient due to its widespread involvement of bone, leading to long bone deformities (such as bowing of legs), early deafness, and a pathognomonic manifestation in the eye known as "blue sclera." Wormian bones seen on a lateral skull radiograph serve as a constant and confirmatory radiological finding of this "brittle bone disease." This paper highlights the correct diagnosis of DI Type 1 through comprehensive history taking, clinical and radiographic examination, and unstained ground sectioning (histopathology) of the involved teeth, followed by effective management and comprehensive dental care.
Dr. Priyanka Sharma, Puneeta Vohra, Rachana Negi (2026). Dentinogenesis Imperfecta Type I: From Opalescent Teeth to Obliterated Pulp Chambers—A Clinicoradiographic Insight. Research Paper, 21(9), 1-4. https://doi.org/10.5281/zenodo.22642246
DEVELOPMENT AND VALIDATION OF A STANDARDIZED PHANTOMBASED PROTOCOL FOR QUANTIFYING RADIATION DOSE REDUCTION USING LEAD-FREE APRONS IN DIGITAL INTRAORAL RADIOGRAPHY: A COMPARISON ACROSS CMOS SENSORS AND RECTANGULAR COLLIMATION
Objectives: The purpose of this research is to create and test a reliable method to measure how lead-free aprons reduce radiation in digital dental X-rays. Materials and Methods: The clinical setting were simulated employing a standardized adult dental phantom that mimicked the mandibular and maxillary features. Two distinct CMOS detectors had been employed for obtaining intraoral digital imaging according to both round and rectangular collimation conditions. Lead-free protective aprons were positioned over the phantom during selected exposures and a standardized dosimeter has been employed. Each exposure configuration was performed five times to assure similarity and predictability. Results: At all measured anatomical regions, the utilization of free of lead aprons exhibited a noticeable decrease in the exposure to radiation, varying from 35% to 50%. Rectangle collimation observed an extra 15–20% reduction in exposure in contrast to round collimation. Thyroid exposure dropped by as much as 57% when combined preventative approaches were employed. For measuring radiation dosage reduction approaches, the phantom-based methodology appeared to be trustworthy and predictable. The primary determinant that decreased radiation was discovered to be rectangle collimation. The type of CMOS sensor did not significantly affect radiation dose (p = 0.23), indicating that shielding and beam restriction played a more critical role than detector selection.
Amrita Aggarwal, Ekta Parmar, Anshuman Jamdade, Priyanka Sharma, Monika Gupta (2026). DEVELOPMENT AND VALIDATION OF A STANDARDIZED PHANTOMBASED PROTOCOL FOR QUANTIFYING RADIATION DOSE REDUCTION USING LEAD-FREE APRONS IN DIGITAL INTRAORAL RADIOGRAPHY: A COMPARISON ACROSS CMOS SENSORS AND RECTANGULAR COLLIMATION. Research Paper, 21(9), 1-10. https://doi.org/10.5281/zenodo.22657866
Experimental and Force-Balance Analysis of the Deposition Dynamics of Palladium and LANA Metallic Aerosols in Clean and Dust-Laden Air
The study experimentally and numerically investigates the deposition dynamics of Pd and LANA metallic aerosols in clean and dust-laden air environments typical of industrial ventilation, filtration, and particle-handling systems. A controlled aerosol deposition facility was developed with sections for aerosol generation, dust injection, flow conditioning, and deposition measurement. Pd and LANA aerosols were characterized before deposition experiments under varying dust loading conditions. Experimental measurements showed that the deposition fraction increased with axial distance and dust concentration, whereas the deposition velocity depended on particle size, flow velocity, and aerosol–dust interactions. LANA aerosols consistently showed higher deposition fractions than Pd aerosols due to their broader particle-size distribution and enhanced inertial response. A force-balance trajectory model incorporating drag, gravitational settling, Brownian diffusion, electrostatic interaction, and thermophoretic transport interpreted the governing deposition mechanisms. Brownian diffusion dominated ultrafine particle transport, while inertial and gravitational effects became significant for larger particles and elevated dust loadings. Electrostatic interactions were amplified under dust-laden conditions, driven by enhanced particle–particle interactions and charge accumulation. Model predictions showed good agreement with experimental deposition profiles, with deviations generally within 10– 15% across most operating regimes. Sensitivity analysis indicated that dust loading and particle diameter are the dominant coupled parameters controlling deposition enhancement. The proposed experimental–numerical framework provides insights into the transport of metallic aerosols in complex particulate environments and supports the design of advanced aerosol filtration, contamination-control, and industrial ventilation systems.
Trupti Milan Purohit (2026). Experimental and Force-Balance Analysis of the Deposition Dynamics of Palladium and LANA Metallic Aerosols in Clean and Dust-Laden Air. Research Paper, 21(9), 1-13. https://doi.org/10.5281/zenodo.22683893
Integrating Oral Medicine and Dentomaxillofacial Radiology into Orthodontic Diagnosis and Treatment Planning for Pediatric and Adolescent Patients: A Narrative Review
Background: Orthodontic treatment in children and adolescents occurs within a dynamic biological environment influenced by craniofacial growth, eruption, root development, periodontal support, local pathology, and systemic factors. Conventional records remain fundamental; however, selected cases require interdisciplinary assessment and, when justified, threedimensional imaging. Aim: To critically examine the role of oral medicine and dentomaxillofacial radiology in orthodontic diagnosis and treatment planning for pediatric and adolescent patients and to explore how biological and radiological findings may inform biomechanical decision-making. Review Methodology: A narrative synthesis was developed from literature addressing cone-beam computed tomography (CBCT), orthodontic imaging, root resorption, dentoalveolar boundaries, local pathology, and biological determinants of orthodontic tooth movement. Evidence was critically appraised according to study design, findings, limitations, and relevance to the review objectives. Results: The literature consistently supports selective interdisciplinary assessment and indicationbased CBCT rather than routine volumetric imaging. Systematic reviews demonstrate improved three-dimensional visualization for selected problems, particularly impacted teeth and associated root resorption; however, evidence that additional imaging or formal interdisciplinary pathways reduce long-term orthodontic complications remains limited. Evidence on orthodontically induced external apical root resorption (OIEARR) confirms multifactorial etiology, substantial methodological heterogeneity, and generally low certainty for many proposed predictive factors.
Dr. Vikas Kumar, Dr. Anshuman S Jamdade, Dr. Nidhi Yadav (2026). Integrating Oral Medicine and Dentomaxillofacial Radiology into Orthodontic Diagnosis and Treatment Planning for Pediatric and Adolescent Patients: A Narrative Review. Research Paper, 21(9), 1-11. https://doi.org/10.5281/zenodo.22702285
Module Amenability of Banach Algebras on Some Modules
In this paper, we investigate some properties of modular amenability of Banach algebras. Also, we will showd that If A be a Banach algebra and A-module two-side Banach algebra, then the cyclic modular amenability A and A♯ is investigated.
M. H. Rezaei gol (2026). Module Amenability of Banach Algebras on Some Modules. Research Paper, 21(9), 1-6. https://doi.org/10.5281/zenodo.22765997
A Transform-Based Homotopy Analysis Method Using the Fractional Double Sumudu Transform for Nonlinear Fractional Partial Differential Equations
The study of fractional partial differential equations has received considerable attention because of their broad applicability in modeling complex systems exhibiting nonlocal and memory-dependent behaviour. In this paper, a new hybrid analytical technique, namely the Fractional Double Sumudu Homotopy Analysis Transform Method (FDSHATM) is proposed for obtaining approximate analytical solutions of nonlinear fractional partial differential equations. The method combines the Fractional Double Sumudu Transform with the Homotopy Analysis Method to generate rapidly convergent series solutions without discretization or perturbation assumptions. The proposed algorithm is applied to two FPDEs and the obtained results are found to be in excellent agreement with the corresponding exact solutions. The convergence of the solution series is effectively controlled through the auxiliary parameter 0 , demonstrating the accuracy, reliability and efficiency of the proposed method. The developed technique provides a simple and effective framework for solving a broad class of linear and nonlinear fractional partial differential equations.
Dhara Patel, Dr. Jaimikaben R. Surawala (2026). A Transform-Based Homotopy Analysis Method Using the Fractional Double Sumudu Transform for Nonlinear Fractional Partial Differential Equations. Research Paper, 21(9), 1-10. https://doi.org/10.5281/zenodo.22766127
EQUITABLE ECCENTRIC DEGREE DOMINATION NUMBER OF GRAPHS
A subset 𝑆 ⊆ 𝑉(𝐺) is called an equitable eccentric degree dominating (EEDD) set if for every 𝑣 ∈ 𝑉 − 𝑆 there exists atleast one vertex 𝑢 ∈ 𝑆 such that 𝑢𝑣 ∈ 𝐸(𝐺) and |𝑒𝑑(𝑢) − 𝑒𝑑(𝑣)| ≤ 1. Minimum cardinality of equitable eccentric degree dominating set is called equitable eccentric degree domination unmber (EEDDN) of 𝐺, denoted 𝛾𝑒𝑑(𝐺). In this paper we study (EEDDN) for path, complete graphs, cycles, star graphs, bipartite graphs and wheel graphs. We also obtain some bounds.
Hasan J H Abuowda, Veena Mathad (2026). EQUITABLE ECCENTRIC DEGREE DOMINATION NUMBER OF GRAPHS. Research Paper, 21(9), 1-9. https://doi.org/10.5281/zenodo.22766187
Synthesis of triazoles via click chemistry approach through the preparation of a recyclable hydrotalcite supported copper nano catalyst.
Heterocyclic chemistry serves as an illustration for the lack of clear boundaries because it permeates many of the other chemical fields. Biological processes are intimately associated with heterocycles. Heterocycles are very important to the pharmaceutical and agricultural industries due to their natural occurrence. Heterocycles and the chemistry-biology link are present in about 90% of newly developed drugs. Triazole, also known as pyrrodiazole, has a nitrogenous heterocyclic component and has the chemical formula C2H2N3. Many studies have been conducted on fivemember heterocyclic triazole rings. The pharmacological activities of triazole compounds include antibacterial,anticonvulsant, antitubercular, antituberculosis, antimicrobial, and anti-inflammatory qualities. In order to determine the molecular structure, substituted triazoles containing heterocyclic scaffolds have been synthesised and characterised using NMR and MS spectroscopy. Using hadrotalcite as a solid support and water-ethanol as an effective solvent, a one-pot multicomponent mechanistic pathway in the presence of Cu nanocatalyst was used to carry out the synthesis of this method.
VAIBHAV TRIPATHI, AMULYA SINHA, ARZOO SIDDIQUI, AMIT YADAV, GIRISH SINGH, DHARMENDRA SINGH and VIVEK BHADAURIA (2026). Synthesis of triazoles via click chemistry approach through the preparation of a recyclable hydrotalcite supported copper nano catalyst.. Research Paper, 21(9), 1-14. https://doi.org/10.5281/zenodo.22823099
Production and Marketing of Taxus wallichiana in the Uttarakhand Himalayas: A Review
Taxus wallichiana (Himalayan yew), an endangered conifer native to the temperate forests of the Uttarakhand Himalaya, holds immense pharmacological significance as the primary natural source of paclitaxel (taxol), a potent anticancer compound used globally in the treatment of ovarian, breast and lung cancers. This review synthesizes current knowledge on the production, traditional uses, conservation challenges and marketing dynamics of T. wallichiana in the region, drawing on ecological assessments, ethno-botanical surveys and policy analyses. Despite its high medicinal and economic value, the species faces severe threats from overexploitation, illegal harvesting, habitat degradation and anthropogenic pressures, resulting in population declines of up to 90% across its range. The slow growth rate, low seed production and poor natural regeneration capacity of T. wallichiana further exacerbate its vulnerability to extinction. The review examines the dual role of T. wallichiana in local livelihoods and global pharmaceutical markets, highlighting its traditional uses in Ayurveda, Tibetan medicine and indigenous practices, including its use as a tea substitute by the Bhotiya tribal community of Uttarakhand. It also evaluates the legal and regulatory frameworks governing its conservation, including its listing under Schedule VI of the Indian Wildlife Protection Act and the IUCN Red List as Endangered. Marketing channels for T. wallichiana products remain largely informal and unregulated, with limited value addition and poor market access for local harvesters. The paper identifies critical gaps in sustainable production practices, community-based conservation initiatives and benefit-sharing mechanisms under India's biodiversity laws. Key recommendations emerging from this review include the urgent need for: (i) large-scale in-situ and ex-situ conservation programs coupled with biotechnological interventions for mass propagation; (ii) community-led awareness campaigns on sustainable harvesting and the ecological importance of the species; (iii) development of regulated supply chains and fair-trade marketing mechanisms to ensure equitable benefit distribution; and (iv) integration of traditional knowledge with modern cultivation techniques to reduce pressure on wild populations. This review underscores the necessity of balancing conservation imperatives with sustainable production and marketing strategies to safeguard T. wallichiana for future generations while supporting the livelihoods of Himalayan communities dependent on this invaluable resource.
Vivek Kumar Kedia, Rajendra Singh Parihaar and Renu (2026). Production and Marketing of Taxus wallichiana in the Uttarakhand Himalayas: A Review. Research Paper, 21(9), 1-11. https://doi.org/10.5281/zenodo.22841721
A Generalized Fixed Point Result on G-Contraction of CCMS
In this paper, we obtain a generalized results of G- contraction in CCMS (Complete Cone Metric Spaces) . These results are generalization and extension results of some of the well known results existing in the literature.
K. Prudhvi (2026). A Generalized Fixed Point Result on G-Contraction of CCMS. Research Paper, 21(9), 1-4. https://doi.org/10.5281/zenodo.22909530
Revisiting the FDI -Growth Nexus: Evidence from Kazakhstan
Since gaining independence from the Soviet Union in 1991, the Republic of Kazakhstan has benefited greatly from foreign direct investment (FDI) in comparison to other Commonwealth of Independent States nations. This study looks into how FDI affects Kazakhstan's economic growth from 1994-2024. When the gross domestic product is the regressive variable, it incorporates investment, foreign trade, labour force participation rate, inflation, and natural resources as explanatory constructs. Data stationarity is tested using the Phillips and Perron (1988) and modified Dickey and Fuller (1981) methods. The Autoregressive Distributed Lag (ARDL) model is justified by the mixed order of integration I (0) and I (1). The bound test demonstrates a lasting relationship between the relevant variables. The findings show that FDI, GFCF and trade openness all have a favourable long-term effect on economic growth. Natural resource rents on the other hand continue to be statistically negligible, while the labour force participation rate shows a strong negative relationship with economic growth, indicating structural labour market difficulties. Only Capital Formation, labour force participation rate and trade openness have a major short-term impact on economic growth. The optimal lag selection process prevents the short-term effects of FDI, inflation and natural resource rents from being seen. The results indicate that in order to achieve sustainable long-term economic growth in Kazakhstan, it is imperative to improve institutional quality, diversify the economy and draw in FDI that boosts productivity.
Rehana Akther, M. Afzal Mir (2026). Revisiting the FDI -Growth Nexus: Evidence from Kazakhstan. Research Paper, 21(9), 1-21. https://zenodo.org/records/22955294
PetFeed Planner: An Integrated AI and IoT Platform for Automated Food Analysis and Personalized Pet Nutrition Management
The rapid growth in pet-owning households has significantly increased the demand for systematic pet health and nutrition management. However, pet owners frequently rely on subjective experience rather than scientific guidelines when determining daily feeding amounts, often leading to issues such as obesity, malnutrition, or nutritional imbalance. Furthermore, general users frequently struggle to interpret complex nutritional information and ingredient lists on commercial pet food packaging. To address these challenges, this study proposes PetFeed Planner, a comprehensive mobile platform that integrates artificial intelligence (AI) and the Internet of Things (IoT) for automated food analysis and personalized feeding management. The proposed system empowers users to analyze pet food products via image recognition, receive tailored feeding recommendations based on individual pet profiles, and seamlessly track longitudinal feeding records. Additionally, an IoT-equipped smart feeder with integrated load cell sensors automatically measures actual consumption and synchronizes real-time data with the mobile application for advanced monitoring and statistical analysis. The platform was engineered using React Native for the mobile frontend, Go for the backend server, Python FastAPI for AI-driven analysis services, Oracle Database for persistence, and an ESP32 microcontroller with HX711 sensors for IoT hardware integration. Throughout the development lifecycle, critical software engineering hurdles—such as AsyncStorage structure optimization, centralized exception handling, and the harmonization of manual versus IoT-generated feeding records—were successfully resolved to enhance system stability, maintainability, and data consistency. Comprehensive experimental testing and a user study involving 36 participants (yielding an overall satisfaction score of 4.00 out of 5.00) verified the robust performance and practical utility of core features. Ultimately, this research demonstrates the high feasibility and effectiveness of fusing AI and IoT technologies to build an advanced, usercentric pet feeding management ecosystem.
Kimbohyun, Kim semin, Byeongchang Kang, Khant Ko Ko, Seungjae Lee (2026). PetFeed Planner: An Integrated AI and IoT Platform for Automated Food Analysis and Personalized Pet Nutrition Management. Research Paper, 21(9), 1-15. https://zenodo.org/records/23012724
A Multi-Layer Optimisation Framework for Anaerobic-Digestion-Based Sustainable Aviation Fuel Production from Agricultural Residues
Sustainable Aviation Fuel (SAF) derived from agricultural residues via anaerobic digestion (AD) offers a promising pathway for aviation decarbonisation. However, current research is characterised by fragmented optimisation approaches focusing on isolated process stages− pretreatment, digestion, upgrading, or synthesis− rather than integrated system performance. This study presents a novel six-layer integrated optimisation framework for AD-based SAF production that connects feedstock characterisation, pretreatment decision-making, AD process optimisation, advanced hybrid modelling, system-level design, and sustainability evaluation. The framework was developed through quantitative analysis of engineering performance data from 33 studies (methane yield:29.7-312 mL CH4/g VS; yield improvements: 41.6-209%) combined with qualitative synthesis of optimisation methodologies. Key innovations include (i) integration of energy and cost penalties within the pretreatment decision layer; (ii) hybrid Artificial Neural Network-Genetic Algorithm (ANN-GA) optimisation enhine achieving predictive accuracy of R2= 0.974-0.981; (iii) Mixed-Integer Linear Programming (MILP) for system-level configuration; and (iv) embedded Techno-Economic Analysis and Life Cycle Assessment within optimisation loop. Application of the framework demonstrated significant performance improvements: methane yield enhancement up to 20% under optimised conditions, emissions reductions of 77%, and carbonnegative operation (-4.58 g CO2e/MJ). The framework addresses critical limitation in existing literature multi-objective optimisation that simultaneously considers yield, cost, and environmental performance. This integrated approach provides a decision-support tool for engineers and policymakers, facilitating the transaction from laboratory-scale optimisation to industrial deployment of AD-based SAF systems.
Darlington Eze Ekechukwu, Benneth Ikechukwu Eziefula and Isiguzo Edwin Ahaneku (2026). A Multi-Layer Optimisation Framework for Anaerobic-Digestion-Based Sustainable Aviation Fuel Production from Agricultural Residues. Research Paper, 21(9), 1-23. https://zenodo.org/records/23036720
Agricultural Residue Impact on Fuel Production via Anaerobic Digestion: A Systematic Assessment
This study investigates how feedstock characteristics of agricultural residues influence optimisation strategies and techno-economic-environmental performance for anaerobic digestion (AD) based sustainable aviation fuel (SAF) production. Quantitative analysis of 33 engineering studies (methane yield: 29.7-312 mL CH4/g VS) was combined with qualitative synthesis to link feedstock properties-lignocellulosic composition outcomes. Results demonstrate that feedstock characteristics are primary determinants of optimisation pathways. High-lignin feedstocks (15- 25% lignin, e.g., rice husks, oil palm residues) require intensive pretreatment (torrefaction, hydrothermal, alkaline), achieving yield improvements of 137-209% but with energy penalties of 15-30% of total system energy. High-carbohydrate feedstocks (low lignin, e.g., cassava peels) respond better to pH and totaanial solids optimisation (20-25% TS), achieving moderate yield improvements (41-75%) with lower energy input. Optimal C:N ratio of 20-30:1 is achieved through co-digestion, enhancing stability and yield by 20-50%. Techno-economic analysis shows that high-intensity pretreatment achieves lower minimum fuel selling price ($15.4/GJ) only under favourable policy conditions, while moderate strategies achieve better energy return on investment (EROI > 3). Environmental assessment demonstrates emission reductions of 77% and carbonnegative operation (-4.58 g C02e/MJ) with optimised methane capture, though high-intensity pretreatment can increase net emissions if energy inputs exceed methane gains. This study demonstrates that feedstock-informed, multi-objective optimisation-rather than universal yield maximisation-is essential for sustainable AD-based SAF deployment.
Darlington Eze Ekechukwu, Chima Clifford Ngumah, Bennett Ikechukwu Eziefula, and Toochukwu E. Ogbulie (2026). Agricultural Residue Impact on Fuel Production via Anaerobic Digestion: A Systematic Assessment. Research Paper, 21(9), 1-23. https://zenodo.org/records/23036760
Engineering Evaluation and Production of Biogenic Food-grade CO2 Capture via Biogas Treatment: A Review
It is becoming more widely accepted that carbon dioxide CO2 is both a potential feedstock for circular carbon initiatives and climate liability. Together with interest in biogenic CO2 recovered from biogas systems as a low-carbon substitute for CO2 obtained from fossil fuels has increased due to the growing need for sustainable CO2 sources in the food and health industries. With an emphasis on technological paths, purification requirements, and sustainability implications, this review offers a thorough engineering evaluation of biogenic food-grade CO2 synthesis via biogas treatment. In addition to contaminants including hydrogen sulphide, moisture, oxygen, and trace volatile chemicals, biogas produced by anaerobic digestion of organic wastes usually contain sizable proportions of methane and biogenic CO2. The CO2 fraction can be extracted, refined, and upgraded to satisfy strict food-grade requirements when treated properly. However, its chemical makeup, including application-specific impurity limits, and its origin whether biogenic or fossilbased are crucial for its practical application. This review provides an insight into contemporary CO2 capture and utilization approaches, benefits of biogenic food-grade CO2 over fossil-based CO2 as well as biogas as a source for biogenic CO2 capture. It also offers an overview of engineering evaluations and production of food-grade CO2 capture technology, it environmental and economic benefit. The major capture technologies that were considered in this review include; Chemical scrubbing (Amine scrubbing), Pressure Swing Adsorption (PSA), Membrane Separation and Cryogenic Separation. From an environmental standpoint, the review emphasizes how biogenic CO2 capture supports circular economy models, lessens dependency on CO2 derived from fossil fuels, and helps mitigate climate change. Future research needs, verification of biogenic origin, and regulatory implications are also included in the article. Overall, this review identifies important opportunities and obstacles for its broader adoption in sustainable food and health sector applications and offers an organized framework for comprehending the engineering, environmental, and industrial aspects of producing food-grade biogenic CO₂ via biogas treatment.
Darlington Eze Ekechukwu, Chima Clifford Ngumah, Chinonye Chijioke, Bennett Ikechukwu Eziefula and Toochukwu Ekwutosi. Ogbulie (2026). Engineering Evaluation and Production of Biogenic Food-grade CO2 Capture via Biogas Treatment: A Review. Research Paper, 21(9), 1-30. https://zenodo.org/records/23056398
Healthcare Utilization, Demographic Disparities and Financial Protection under the Ayushman Bharat PM-JAY SEHAT Scheme: Evidence from District Baramulla, Jammu and Kashmir
Ayushman Bharat Pradhan Mantri Jan Arogya Yojana-SEHAT (AB-PMJAY-SEHAT) represents a significant policy initiative aimed at achieving Universal Health Coverage (UHC) by improving access to quality healthcare and providing financial protection against catastrophic health expenditure in the Union Territory of Jammu and Kashmir. This study examines the trends in healthcare utilization, rural-urban and gender disparities, and healthcare expenditure under the ABPMJAY-SEHAT scheme in District Baramulla during the period 2020-2024. The study is based on secondary data obtained from two empaneled public healthcare institutions-Government Medical College (GMC) Baramulla and Sub-District Hospital (SDH) Kreeri. A mixed-methods analytical framework comprising descriptive statistics, trend analysis, disparity indices, the Shapiro-Wilk normality test, and independent-samples t-tests was employed to assess utilization patterns and demographic differences. The findings reveal a substantial increase in healthcare utilization across major medical and surgical specialties, indicating the progressive expansion of the scheme and improved access to healthcare services. General Medicine exhibited the highest growth, while General Surgery, Ophthalmology, ENT, and Orthopaedic services also recorded significant increases over the study period. The Shapiro-Wilk test confirmed that the data satisfied the assumption of normality, justifying the application of parametric statistical analysis. The independent-samples t-test demonstrated a highly significant rural-urban disparity in healthcare utilization (t = 6.75, p < 0.001), with rural beneficiaries exhibiting substantially higher utilization than urban beneficiaries. Furthermore, a statistically significant gender difference was observed (t= –2.90, p = 0.05), with female beneficiaries recording higher overall utilization, although gender disparities varied across medical specialties. The expenditure analysis further indicates that the scheme has strengthened financial protection by supporting access to both routine and specialized healthcare services. The study concludes that AB-PMJAY-SEHAT has substantially enhanced healthcare utilization and expanded access to secondary and tertiary healthcare services in District Baramulla. However, persistent geographical and specialty-specific disparities underscore the need for targeted policy interventions focusing on equitable healthcare access, strengthened district-level health infrastructure, increased beneficiary awareness, and continuous monitoring to enhance the effectiveness of the scheme in advancing Universal Health Coverage.
Basharat Ramzan Bhat, Aijaz Abdullah Thoker (2026). Healthcare Utilization, Demographic Disparities and Financial Protection under the Ayushman Bharat PM-JAY SEHAT Scheme: Evidence from District Baramulla, Jammu and Kashmir. Research Paper, 21(9), 1-30. https://zenodo.org/records/23056491

